AirFly Pro is a Bluetooth transmitter and receiver designed to stream audio from wired sources to wireless headphones like AirPods. It enhances audio connectivity seamlessly anywhere.
1.1 What is AirFly Pro?
AirFly Pro is a portable Bluetooth transmitter and receiver designed to stream audio wirelessly from wired sources to AirPods and other wireless headphones. It supports seamless connectivity with devices like iPhones, iPads, and AirPods, and can also connect to AUX-IN ports on airplanes, gym equipment, and TVs. Perfect for enhancing audio experiences on the go, it allows users to enjoy high-quality sound effortlessly.
1.2 Key Features and Benefits
AirFly Pro offers dual-mode functionality, acting as both a transmitter and receiver, enabling versatile audio streaming. It supports pairing with up to two wireless headphones simultaneously, enhancing shared listening experiences. With a long-lasting battery life, it provides uninterrupted audio on the go. Its compact design and user-friendly interface make it easy to connect to devices via Bluetooth or AUX-IN ports, ensuring seamless audio enjoyment anywhere.
Getting Started
Unbox and physically inspect the AirFly Pro, ensuring all components are included. Begin by charging the device to prepare for pairing and first-time use seamlessly.
2.1 Unboxing and Physical Overview
Upon unboxing, you’ll find the AirFly Pro device, a USB-C charging cable, and a quick start guide. The compact design features a LED indicator, control buttons, and a 3.5mm AUX port. Built with premium materials, it’s lightweight and portable, ensuring easy use on the go. The sleek design and intuitive controls make it user-friendly for seamless audio transmission and reception.
2.2 Charging the Device
Charging the AirFly Pro is straightforward. Use the provided USB-C cable to connect it to a USB power source. The LED will turn red during charging and switch to white once fully charged, which typically takes about 2 hours. Ensure the device is fully charged before first use for optimal performance.
Pairing AirFly Pro
AirFly Pro enters pairing mode automatically after charging. The LED turns white, indicating readiness to connect with AirPods or other wireless headphones seamlessly.
3.1 Pairing with AirPods
To pair AirFly Pro with AirPods, place the AirPods in their charging case and open the lid. Press and hold the pairing button on the AirFly Pro until the LED flashes white. The AirPods will automatically detect and connect to the AirFly Pro. Once connected, the LED will remain steady, indicating a successful pairing. This process allows seamless audio streaming to your AirPods.
3.2 Pairing with Other Wireless Headphones
To pair AirFly Pro with other wireless headphones, ensure your headphones are in Bluetooth pairing mode. Press and hold the pairing button on AirFly Pro until the LED flashes white. The device will search for nearby headphones and connect automatically. Once connected, the LED will remain steady, indicating successful pairing. This process works seamlessly with most Bluetooth-enabled headphones, providing reliable audio streaming.
Using AirFly Pro
AirFly Pro is a dual-mode Bluetooth device that transmits audio to wireless headphones or receives audio from devices. It works seamlessly with AirPods and other headphones, enabling high-quality audio streaming from AUX-IN ports, airplanes, or home entertainment systems. Its portability and versatility make it ideal for travel or everyday use.
4.1 Using with AirPods
Connect your AirPods to AirFly Pro by placing them in pairing mode. Ensure Bluetooth is disabled on other devices. Once paired, AirFly Pro seamlessly transmits audio to your AirPods in transmit mode or receives audio when in receive mode. This allows you to enjoy high-quality sound from any AUX-IN source, such as airplanes, TVs, or gym equipment, making it perfect for on-the-go use.
4.2 Using with AUX-IN Ports
Connect AirFly Pro to any AUX-IN port on devices like airplanes, TVs, or gym equipment. Simply plug in the 3.5mm cable, switch to transmit mode, and pair your wireless headphones. This setup allows you to stream high-quality audio seamlessly from wired sources to your AirFly Pro, ensuring an enhanced listening experience wherever you go.
Advanced Features
AirFly Pro offers advanced features like switching between transmit and receive modes, connecting multiple devices, and seamless audio streaming, enhancing your wireless audio experience with versatility.
5.1 Switching Between Transmit and Receive Modes
AirFly Pro allows seamless switching between transmit and receive modes. In transmit mode, it streams audio from wired sources to wireless headphones. In receive mode, it acts as a Bluetooth speaker. Press and hold the power button to switch modes. The LED indicator changes color to confirm the active mode: white for transmit and blue for receive, ensuring easy operation and versatility in use.
5.2 Connecting Multiple Devices
AirFly Pro supports connecting up to two wireless headphones simultaneously. To connect multiple devices, pair the first device in transmit mode. Once connected, press the power button to enter pairing mode again for the second device. The LED will flash white during pairing. This feature allows seamless audio sharing with friends or family, enhancing your listening experience on flights, at the gym, or home. Refer to the manual for detailed steps.
Troubleshooting Common Issues
Common issues include connection drops or poor audio quality. Reset AirFly Pro by holding the power button for 10 seconds. Ensure firmware is updated for optimal performance.
6.1 Connection Problems
Connection issues with AirFly Pro often arise from improper pairing or interference. Ensure Bluetooth is disabled on other devices. Reset AirFly Pro by holding the power button for 10 seconds. Verify you’re in the correct mode (transmit or receive). Move devices closer to minimize interference. If problems persist, restart both AirFly Pro and your headphones, then attempt pairing again.
6.2 Audio Quality Issues
Poor audio quality with AirFly Pro may stem from signal interference or low battery. Ensure the device is fully charged and restart it. Check for firmware updates, as outdated software can affect performance. Move devices closer to reduce interference. If issues persist, reset AirFly Pro by holding the power button for 10 seconds and retry pairing. This often resolves distortion or dropouts effectively.
Maintenance and Care
Regularly clean AirFly Pro with a soft cloth to prevent dust buildup. Avoid exposure to liquids and extreme temperatures. Update firmware periodically for optimal performance and stability.
7.1 Cleaning the Device
To clean AirFly Pro, use a soft, dry cloth to wipe away dust and debris. Avoid using liquids, chemicals, or abrasive materials, as they may damage the device. Gently clean the connectors and speakers with a cotton swab. Regular cleaning ensures optimal performance and prevents dirt from interfering with audio quality or connectivity. Always handle the device with care to maintain its functionality and longevity.
7.2 Updating Firmware
To update AirFly Pro’s firmware, visit the official Twelve South support website and navigate to the AirFly Pro section. Download the latest firmware update and follow the provided instructions. Ensure the device is fully charged and connected to a stable internet source. Carefully follow the step-by-step guide to avoid any issues. Once updated, the device will restart, confirming successful installation. Regular updates ensure improved performance and new features.
Technical Specifications
AirFly Pro operates on a frequency range of 2402-2480MHz with a transmission power of 4dBm. It supports Bluetooth 5.0 for seamless audio streaming to devices.
8.1 Frequency Range and Transmission Power
The AirFly Pro operates on a frequency range of 2402-2480MHz, ensuring stable Bluetooth connectivity. It has a transmission power of 4dBm, which provides reliable audio streaming within its range. This specification enables seamless pairing with devices like AirPods and other wireless headphones, delivering high-quality sound without interference. The device’s efficient power output ensures consistent performance across various environments.
Additional Resources
Access the PDF manual for detailed instructions. Visit Twelve South support for assistance or download the Quick Start Guide for easy setup and troubleshooting tips.
9.1 Accessing the PDF Manual
To access the AirFly Pro PDF manual, visit the Twelve South website and navigate to the support page. Select your product and download the manual for free. It provides detailed instructions, troubleshooting tips, and technical specifications to help you make the most of your AirFly Pro device.
9.2 Contacting Twelve South Support
For assistance with your AirFly Pro, visit the Twelve South website and navigate to the support page. Submit a support ticket or contact their team directly at support@twelvesouth.com. Their dedicated team is available to address any questions or issues you may have, ensuring a smooth experience with your device.
Quick Start Guide
Charge the device, pair your AirPods or wireless headphones, and connect to AUX-IN ports. Follow the step-by-step pairing process and enjoy seamless audio streaming instantly.
10.1 Step-by-Step Pairing Process
- Press and hold the power button on AirFly Pro until the LED flashes blue, entering pairing mode.
- Open your AirPods case and press the setup button on the back to initiate pairing.
- Once connected, the LED will stop flashing, confirming successful pairing.
10.2 Basic Operations Overview
AirFly Pro operates in two modes: Transmit and Receive. In Transmit Mode, it streams audio from wired sources to wireless headphones. In Receive Mode, it acts as a speaker, streaming audio from your phone to wired systems. Simply switch modes using the button on the device. The LED indicator shows the active mode, ensuring easy operation for seamless audio connectivity on the go.
Safety Precautions
Handle AirFly Pro carefully, avoiding extreme temperatures and moisture. Use original chargers to prevent damage. Keep out of reach of children and avoid improper disassembly.
11.1 Important Safety Information
Handle AirFly Pro with care to avoid damage. Avoid exposing the device to extreme temperatures, moisture, or physical stress. Use only original chargers and cables to prevent malfunctions. Keep the device out of reach of children and avoid improper disassembly. Follow all safety guidelines to ensure optimal performance and longevity of your AirFly Pro.
11.2 Proper Handling and Storage
Store AirFly Pro in a cool, dry place, away from direct sunlight. Use the original packaging or a protective case to prevent damage. Handle the device gently to avoid scratches or breaks. Clean only with a soft, dry cloth to maintain functionality. Avoid exposing it to liquids or extreme temperatures. Proper storage ensures longevity and optimal performance of your AirFly Pro.